Era injection are all now completely easy, for example when the service so much easier, because they do not need to disassemble the carburetor to clear the channel and nozzle in it. So what if the injection system is dirty?
Well if the injection system is dirty, especially the fuel line, then the cleaning is also easy, disposable usaja tent Injector Cleaner many brands offered no brand WURTH, 3M, STP, Whealthy and others.
Based on the results test wich has been done, with this fluid injector to the combustion chamber can be clean without unloading that can save time and costs for the fare is only Rp 150 thousand, can be used for all injection motor.
Compare if the cleaning is done with the demolition of the bike especially classmates Ninja 250 or larger, if the unloading cylinder head plus komponenyang gasket replaced, as would the total be very expensive.
And what about the application process, For Kawasaki Ninja 250.
The first tank is removable, including the hose from the gas pump.
Both liquid cleaner tube inserted into the container.
All three tools are assembled and as a replacement fuel pump, the fluid is compressed using air from a compressor with pressure over 60 psi.
The fourth
machine is turned on in a stationary state until injector cleaner runs about half an hour. After cleaning fluid runs out and the machine off, then stay reassembled. Feel deh pull effect would be lighter.
THANKS FOR WATCHING
Tidak ada komentar:
Posting Komentar